ZUWA Drill Powered Transfer Pump HD COMBISTAR 2001-B Stainless

Description

ZUWA Portable Drill Powered Pump made in Germany. Drill Not Included. Heavy Duty Combistar model 2001-B 316 Stainless Steel wetted parts,Marine grade aluminum non-wetted parts.Viton A impeller suitable for a wide variety of fluids. Buna N, EPDM, Neoprene and Thermoplastic impellers optional. Can be used with cordless,corded and air drills.Self Priming up to 20 feet. This a heavy duty tool for emptying drums, large tanks, ditches, sumps, hot water heaters, gearboxes etc. Flow rate maximum 16 GPM. Max working pressure 60 PSI) 1" NPT connections. Please do not confuse this pump with those sold in hardware stores and online. In most cases they won't prime anymore than 3-4 feet with very low discharge pressures. They have no other impeller materials than the standard and are not made to be repaired.Zuwa pumps are made in Germany and JH Process is the exclusive North American stocking distributor. We have parts readily available from Exton PA. If you have any questions regarding your application please contact us with liquid details. Other models available with 3/4 inch and 1 1/4 inch connections and flows to 24 gallons per minute. 12 and 24 volt units are also in stock.
Drums, IBC, Tanks, Pits, Sumps, Hot Water Heaters, Gear Boxes, Wind Turbines Gear Boxes, Distilleries, Wineries, Home Brewers, Meter Boxes
Fuel Oils, Diesel Exhaust Fluid (DEF),Kerosene, Lube Oils, Wastewater, Antifreeze, Acids, Caustics, Thick and Hot Fluids, CBD Oil, Liquid Fertilizer,
Call or email us with your fluid application. Pump is not designed for dry running more than 1 minute
NOTE: Using a cordless or corded drill will produce possible sparking and is NOT recommended for gasoline and some solvents which are highly flammable with a low flash point. Air motors and air drills can be used for flammable liquids. Unit should be properly grounded. We can provide wired motors suitable for highly flammable liquids. Please contact us.